Lining & Insulation
One of the most important parts of your van conversion is the lining as this is usually the first part completed and the project grows from there. This is our most popular service and our customers are more than happy with the results they get from it. The process starts with the van being stripped out, front seats are removed and the interior is thoroughly cleaned. This will ensure that the carpet gets good adhesion. We use high-quality glue that is temperature stable to 120c.
All metalwork is lined separately from the panels to allow easy access if required once the van is rebuilt. Damping mat is applied to the panels followed by 100% recycled low-profile insulation. The insulation will not absorb moisture and does not support mould growth. Panels are lined and replaced, leaving you with a stunning end result. We avoid using a sheep’s wool-based material as it not only absorbs water but can give off a pungent smell in warmer temperature.
Ultra Sound Dampening
If you want to go a step further then Ultra Sound Dampening is a great add-on. This process uses a 2mm polymeric based dampening mat with an aluminium surface that converts vibration into thermal energy. This will reduce the road noise even further resulting in an even better drive. Needing only a 30% coverage to be effective we go a step further with a 70% coverage. We cover the roof, sides & doors including the driver and passenger doors. This also results in a massive improvement to the quality of sound from your front door speakers.
Next, we use a 16mm sound and heat insulation material that features a high grade reinforced reflective foil combined with a thick dense 15mm closed cell foam. It will not absorb water and temperatures will be controlled, warmer in the winter, cooler in the summer.
All products used in our van lining packages are high quality, fire tested and specifically designed for use in vehicles.
- Delux Lining Detailing
- Alcantara Headlining
- LED lighting
- 12v and USB sockets
- Floor Mats